Biomorey for 96 Hole Module Suitable for 0.1ml and 0.2ml Thermal Cycle Module

Product Detail

Biomoreyof PCR board:·It is Biomorey for the standard 96 hole module, which is produced in strict accordance with the high quality standard. The experimental results are uniform, and the tube wall is thin and uniform, which ensures the heat transfer speed and uniform heating of the sample. 8 / 12 strip tube cover or sealing film can be used.·Polypropylene (PP) material manufacturing.·Suitable for 0.1ml and 0.2ml thermal cycle module
CategoryArticle numberProduct namePackage specificationPCR plates8020110.2ml, 96 well PCR plate, Half Skirt, Clear, No printing10pcs/bag, 50pcs/cn8020120.2ml, 96 well PCR plate, Non Skirt, Clear, No printing10pcs/bag, 50pcs/cn8020130.2ml, 96 well PCR plate, Non Skirt, white, No printing10pcs/bag, 50pcs/cn8020140.1ml, 96 well PCR plate, Non Skirt, Clear, No printing10pcs/bag, 50pcs/cn8020150.1ml, 96 well PCR plate, Non Skirt, white, No printing10pcs/bag, 50pcs/cn8020160.2ml, 96 well PCR plate, Half Skirt, Clear, Printing10pcs/bag, 50pcs/cn8020170.2ml, 96 well PCR plate, Non Skirt, Clear, Printing10pcs/bag, 50pcs/cn8020180.2ml, 96 well PCR plate, Non Skirt, White, printing10pcs/bag, 50pcs/cn8020190.1ml, 96 well PCR plate, Non Skirt, Clear, printing10pcs/bag, 50pcs/cn8020200.1ml, 96 well PCR plate, Non Skirt, white, printing10pcs/bag, 50pcs/cn8020340.1ml, 96 well PCR plate, Half Skirt, Clear10pcs/bag, 50pcs/cn8020350.1ml, 96 well PCR plate, Half Skirt, white10pcs/bag, 50pcs/cn8020400.1ml, 96 well PCR plate, Half Skirt, Clear10pcs/bag, 50pcs/cn8020410.2ml, 96 well PCR plate, Half Skirt, Clear10pcs/bag, 50pcs/cn802021PCR sealing Film100pcs/bag8020110.2ml, 96 well PCR plate, Half Skirt, Clear, No printing10pcs/bag, 50pcs/cn
Transport PackingFAQ1.What are the main factors that influence the maximum centrifugal acceleration force?Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.2. What are autoclaving guidelines of plastics?To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.3. What are Biomorey's Commitments to Quality?We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin,